Y&H 2200W Solar Hybrid Inverter Built-in 80A MPPT charge controller This solar inverter is not only efficient and versatile, but it also comes with a smart protection system. It is equipped with an internal sensing chip, so you can trust that your system and connected devices are reliable. Previous page Next page 1 Power your everyday 2 built-in functionality 3 Battery Compatible 4 Port Introduction 5 Remote Monitor Please note: This inverter is not available for 120V That this inverter can not output 110V power, this is a 220V output inverter. This solar hybrid inverter does not support parallel or split phase operation in certain parts of the US. It provides single phase/hot leg 230V output, not 110V AC output. For 110/120V US home appliances, you can add a converter (not included) to step down the 220/240V AC power to 110/120V AC power, allowing you to use your 110V appliances simultaneously. To ensure optimal battery capacity, it is important to consider the specific usage requirements of the load and application scenarios. Failure to do so may result in inadequate battery capacity or excessive power generation waste. For more information, please refer to the manual recommendation or enquire Us for assistance. INVERTER MODEL 2.2 KVA-12V Rated Output Power 2200VA/1800W Nominal PV Voltage 240Vdc PV Array MPPT Voltage Range 55-430Vdc MaxPV ArrayOpen CircuitVoltage 450Vdc AC charger plus solar charger 80Amp Output Voltage Waveform Pure Sine Wave Output Voltage Regulation 230Vac±5% Nominal Input Frequency 50Hz / 60Hz (Auto detection) Peak Efficiency 94% Overload Protection 5s@ 150% lo ad; 10s@ 110%-150% lo ad Surge Capacity 2* rated power for 5 seconds Nominal DC Input Voltage 12Vdc Cold Start Voltage 11.5Vdc Max AC Input Voltage 300Vac No Load Power Consumption <25W